Aluminum foil rewinder, thermal paper slitting machine magnetic powder brake adding magnetic powder
1. Manual powder adding method
Manual powder adding means manually adding magnetic powder powder into the brake body of the magnetic powder brake. The specific operation steps are as follows:
1. Prepare the magnetic powder powder and the powder injection tool. The powder injection tool should be a slender and pointed bell-shaped plastic injection tube.
2. Insert the injection tube into the hole in the brake body of the brake and slowly inject the magnetic powder powder.
3. When injecting magnetic powder powder, it is necessary to ensure that the powder inside the brake body is not full and leave a certain gap.
4. Install the brake body back into the brake to complete the powder adding.
2. Automatic powder adding method
Automatic powder adding means that the magnetic powder brake automatically injects powder into the brake body during operation by setting electronic devices. The specific operation steps are as follows:
1. Install the automatic powder adder on the brake.
2. Electrically connect the automatic powder adder and the brake.
3. When debugging the automatic powder feeder, the magnetic powder powder needs to be placed in the hopper of the automatic powder feeder.
4. During the working process, the magnetic powder brake is automatically injected into the brake body through the automatic powder feeder.
Precautions and common problems:
1. When adding powder manually and automatically, you need to pay attention to the amount of powder added to avoid excessive or insufficient addition.
2. When adding powder manually, you need to pay attention to the speed of adding powder and the uniformity of powder.
3. The cycle and time of adding magnetic powder to the brake need to be adjusted according to the actual situation.
4. When the braking effect is unstable during the process of adding magnetic powder to the magnetic powder brake, it is necessary to check the mechanical structure and electrical connection of the magnetic powder brake.
5. When the powder cannot fill the brake during the process of adding magnetic powder to the magnetic powder brake, it is necessary to check whether there are air bubbles inside the brake.
Summary: The addition of magnetic powder to the magnetic powder brake is generally divided into two ways: manual powder addition and automatic powder addition. It is necessary to pay attention to factors such as the amount of powder added, the speed of powder addition and the uniformity of powder. During operation, if any problems arise, they must be dealt with in a timely manner to maintain the normal operation of the magnetic powder brake.
